Free Web Hosting by Netfirms
 Web Hosting by Netfirms | Free Domain Names by Netfirms

52 Erfan Street, Moharam Bek, Alexandria, Egypt

+203-4968383

                        A recognized supplier for advanced environmental monitoring systems in Egypt and Middle East.

Home Up

Home

 

Fast and reliable spot measurement of hydrogen flux

Hydrosteel 6000 is the ultimate portable monitoring tool for sour, HF and high temperature corrosion and diffusible hydrogen damage in steel.

The intrinsically safe instrument is totally non-intrusive and with minimal test surface preparation, and no consumables such as grease required, reliable measurements can be made within a minute.

Measurements can be taken from small pipes and large vessels, at any orientation and at any temperature up to 500 °C (932 °F), with a single probe.

Key features:

  • Rapid, reliable and repeatable measurement of hydrogen flux
  • Operates on steel up to 500 °C
  • Accommodates surfaces from 2" diameter to flat
  • Operates in any orientation, e.g. at base of pipe and vessels where corrosion commonly occurs
  • Portable, light-weight
  • Simple to use
  • Intrinsically safe
  • Totally non-intrusive
  • Little or no test surface preparation needed
  • No consumables such as adhesives, liquids or greases required.

Technical Specifications:

Intrinsically safe approvals: 
 II 2 G EEX ia II T4 BASEEFA 02ATEX0093
Measurement principle:  
Hydrogen collection and analysis
Operation: 
Battery: 4 x alkaline AA, typically 30 hours lice
Sensitivity: 
+ 1 pl/cm2/s (note: 1 pl = 10-12 liters at s.t.p.)
Range: 
0 to 15000 pl/cm2/s
Accuracy: 
± 10% Displayed reading ± one digit
Response: 
T90 = 40 seconds
Data logging: 
Over 40,000 data points with time and date stamp
Temperature: 

Analyser: -20 to 50 °C (-4 to 122°F)
LT-R probe: Steel surface upto 150 °C (302 °F)
HT-R probe: Steel surface upto 500 °C (932 °F)
Storage: < 20 °C < 68 °F
Dimensions: 
Analyser: 13.5" x 2.3" x 1.9" (340 x 60 x 50 mm)
LT-R probe: 6" (15 cm) diameter
HT-R: 2.3" (5.8 cm) diameter
Weight: 
Analyser 1 lb (450g)
LT-R probe: 14 oz (397 g)
HT-R probe: 11 oz (312 g)
EMC tested: 
To EN50081-1 & EN50082-1 July 98

 

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

 

 

Send mail to info_amatec@yahoo.com with questions or comments about this web site.
Copyright © 2004 AMATEC-Environmental Co.,
Last modified: July 12, 2004